Skip to Content

FUNDING > Mechanics of Materials...

Division of Civil, Mechanical and Manufacturing Innovation

Thomas Siegmund
tsiegmun@nsf.gov, (703) 292-7060

Apply to PD 15-1630 as follows:

For full proposals submitted via FastLane: standard Grant Proposal Guidelines apply.
For full proposals submitted via Grants.gov: NSF Grants.gov Application Guide; A Guide for the Preparation and Submission of NSF Applications via Grants.gov Guidelines apply (Note: The NSF Grants.gov Application Guide is available on the Grants.gov website and on the NSF website at: http://www.nsf.gov/publications/pub_summ.jsp?ods_key=grantsgovguide)

Important Notice to Proposers

A revised version of the NSF Proposal & Award Policies & Procedures Guide (PAPPG), NSF 13-1, was issued on October 4, 2012 and is effective for proposals submitted, or due, on or after January 14, 2013. Please be advised that, depending on the specified due date, the guidelines contained in NSF 13-1 may apply to proposals submitted in response to this funding opportunity.

Please be aware that significant changes have been made to the PAPPG to implement revised merit review criteria based on the National Science Board (NSB) report, National Science Foundation's Merit Review Criteria: Review and Revisions. While the two merit review criteria remain unchanged (Intellectual Merit and Broader Impacts), guidance has been provided to clarify and improve the function of the criteria. Changes will affect the project summary and project description sections of proposals. Annual and final reports also will be affected.

A by-chapter summary of this and other significant changes is provided at the beginning of both the Grant Proposal Guide and the Award & Administration Guide.

Full Proposal Window:  February 1, 2015 - February 17, 2015

February 1 - February 15, Annually Thereafter

Full Proposal Window:  September 1, 2015 - September 15, 2015

September 1 - September 15, Annually Thereafter

Due dates repeat annually. Please reference the CMMI main page for further specifics concerning unsolicited proposal submission windows.

The Mechanics of Materials and Structures program supports fundamental research in mechanics as related to the behavior of deformable solid materials and respective structures under internal and external actions. A diverse and interdisciplinary spectrum of research is supported with emphasis on research that leads to advances in i) theory, experimental, and/or computational methods in mechanics, and/or ii) uses contemporary mechanics methods to address modern challenges in materials and structures. Proposed research can focus on existing or emerging materials and structural systems, across time and length scales.

Proposals related to material response are welcome, and would propose, but not limited to, advances in fundamental understanding of deformation, fracture, fatigue, as well as on contact and friction through constitutive modeling, multi-scale (spatial or temporal) and multi-physics analysis, computational methods, or experimental techniques. Proposals that relate to structural response are welcome and would propose, but not limited to, advances in the understanding of nonlinear deformation, instability and collapse in the context of large deformation, wave propagation, multi-scale (spatial or temporal) and multi-physics analysis, computational methods, or experimental techniques.

Proposals at the intersection or considerate of the integration of material and structure (such as, but not limited to, metamaterials, hierarchical, microarchitectured and low-dimensional materials) are especially welcome. Of particular interest are research questions that address the integration and combination of geometry, topology of material distributions, lengthscales and deformation/failure mechanics. Within this context, the challenge of the notion of what constitutes a “material” or a “structure” is expected to lead to unique opportunities in terms of analysis and experimentation of novel response characteristics.

While the research results should contribute to ultimately guiding assessment of current engineering systems as well as developments of future innovative engineering material and structures with unusual, unprecedented and/or superior physical properties as identified in [1-2], the program emphasis is primarily on making fundamental new advances at the forefront of the field of mechanics.

Proposals with a focus on buildings and civil infrastructure system are welcome in CMMI and should be submitted to the program on Structural and Architectural Engineering (SAE). Proposals addressing processing and mechanical performance enhancements should be submitted to the Materials Engineering and Processing (MEP) program. Investigators with proposals focused on design methodological approaches and theory enabling the accelerated development and insertion of materials should consider the Design of Engineering Material Systems (DEMS) program.

Proposers who wish to discuss their proposed research related to the Mechanics of Materials and Structures program should discuss it with the Program Directors after sending a one-page white paper by email.

[1] National Academy of Engineering, Making a World of Difference: Engineering Ideas into Reality, National Academies Press, September 12, 2014.

[2] Materials Genome Initiative for Global Competitiveness, www.whitehouse.gov/mgi

Design of Engineering Material Systems
Materials Engineering and Processing
Biomechanics and Mechanobiology
Geomechanics & Geomaterials
Emerging Frontiers in Research and Innovation - Office Information
Computational and Data-Enabled Science and Engineering
Software Infrastructure for Sustained Innovation

Cyber-Enabled Materials, Manufacturing and Smart Systems
Faculty Early Career Development (CAREER) Program
Sustainable Chemistry, Engineering, and Materials (SusChEM)

Mechanics & Engineering Materials

What Has Been Funded (Recent Awards Made Through This Program, with Abstracts)

News

Funding Home