Division of Chemical, Bioengineering, Environmental and Transport Systems
|Carole J. Reademail@example.com||(703) 292-2418|
|Catherine Walkerfirstname.lastname@example.org||(703) 292-7125|
Apply to PD 20-7644 as follows:
For full proposals submitted via FastLane: standard NSF Proposal & Award Policies & Procedures Guide proposal preparation guidelines apply.
For full proposals submitted via Grants.gov: the NSF Grants.gov Application Guide: A Guide for the Preparation and Submission of NSF Applications via Grants.gov Guidelines applies. (Note: The NSF Grants.gov Application Guide is available on the Grants.gov website and on the NSF website at: http://www.nsf.gov/publications/pub_summ.jsp?ods_key=grantsgovguide)
Important Information for Proposers
A revised version of the NSF Proposal & Award Policies & Procedures Guide (PAPPG) (NSF 19-1), is effective for proposals submitted, or due, on or after February 25, 2019. Please be advised that, depending on the specified due date, the guidelines contained in NSF 19-1 may apply to proposals submitted in response to this funding opportunity.
Full Proposal Accepted Anytime
Proposals for this program will be accepted throughout the year.
Proposals submitted to other program announcements and solicitations, including the Faculty Early Career Development Program (CAREER), must meet their respective deadlines; please refer to the deadline dates specified in the appropriate announcement or solicitation. Proposals for EArly-concept Grants for Exploratory Research (EAGER) or Rapid Response Research (RAPID) can be submitted at any time but Principal Investigators (PIs) must contact the cognizant program director prior to submission. Proposals for supplements or workshops can be submitted at any time, and PIs are encouraged to contact the cognizant program director prior to submission.
The Electrochemical Systems program is part of the Chemical Process Systems cluster, which also includes: 1) the Catalysis program; 2) the Interfacial Engineering program; and 3) the Process Systems, Reaction Engineering, and Molecular Thermodynamics program.
The goal of the Electrochemical Systems program is to support fundamental engineering research that will enable innovative processes involving electro- or photochemistry for the sustainable production of electricity, fuels, and chemicals. Processes for sustainable energy and chemical production must be scalable, environmentally benign, reduce greenhouse gas production, and utilize renewable resources. Research projects that stress fundamental understanding of phenomena that directly impact key barriers to improved system or component-level performance (for example, energy efficiency, product yield, process intensification) are encouraged. Processes for energy storage should address fundamental research barriers for the applications of renewable electricity storage or for transport propulsion. For projects concerning energy storage materials, proposals should involve hypotheses that involve device or component performance characteristics that are tied to fundamental understanding of transport, kinetics, or thermodynamics. Advanced chemistries are encouraged.
Proposed research should be inspired by the need for economic and impactful conversion processes. All proposal project descriptions should address how the proposed work, if successful, will improve process realization and economic feasibility and compare the proposed work against current state of the art. Highly integrated multidisciplinary projects are encouraged.
Current topics of interest include:
Electrochemical Energy and Chemical Production Systems
Radically new battery systems can move the U.S. more rapidly toward a more sustainable transportation future. The focus is on high-energy density and high-power density batteries suitable for transportation and renewable energy storage applications. Advanced systems such as lithium-air, sodium-ion, as well as lithium-ion electrochemical energy storage are appropriate. Work on commercially available systems such as lead-acid and nickel-metal hydride batteries will not be considered by this program.
Advanced fuel cell systems with advanced components for propulsion for transportation are considered. Novel systems with non-commercial components are appropriate. Flow batteries for energy storage applications are appropriate. Photocatalytic or photoelectrochemical processes for the splitting of water into H2 gas or for the reduction of CO2 to liquid or gaseous fuels are appropriate. If the innovation is fundamental understanding of the catalyst site, then the CBET Catalysis program would be more appropriate (CBET 1401). Novel electrochemical systems for the production of chemicals are considered. Emphasis is placed on those systems that improve process intensification and process modularization. Emphasis of all projects is placed on fundamental molecular-level understanding of the key chemical reaction and transport phenomena barriers to improved system level performance.
Organic Photovoltaics Devices and Processing
Low-cost, environmentally benign organic photovoltaic (PV) solar electricity projects are considered. The program emphasizes fundamental research on innovative processes for the fabrication and theory-based characterization of future organic PV devices. Devices of interest include polymer and small molecule organic photovoltaics for electricity generation. Inorganic or hybrid perovskite-based PV chemistries are not considered by this program.
Referrals to other programs within NSF:
- Proposals that focus on electric-field driven separations such as dielectrophoresis should be directed to the Interfacial Engineering program (CBET 1417).
- Proposals that focus on thermal management of energy storage devices and systems should be submitted to the Thermal Transport Processes program (CBET 1406).
- Proposals that focus on thermal catalytic or thermal noncatalytic biomass conversion and advanced biofuels from lignocellulosic biomass should be directed to the Process Systems, Reaction Engineering and Molecular Thermodynamics program (CBET 1403).
- Proposals related to the combustion of biomass, gasification, or the production of synthesis gas (syngas) should be sent to the Combustion and Fire Systems program(CBET 1407).
- Proposals that focus on the fundamentals of catalysis for biomass conversion should be submitted to the Catalysis program(CBET 1401).
- Proposals that focus on the biological production of fuels or electricity (for example, biocatalysis, metabolic engineering, synthetic biology in the context of bioenergy, biological fermentations) should be directed to the Cellular and Biochemical Engineering program (CBET 1491).
- Proposals that focus on improving device and system performance of primarily inorganic and hybrid PV technologies (including perovskites) may be considered in other ENG Divisions, including the Division of Electrical, Communications, and Cyber Systems. PV materials proposals that focus on the material science may be considered in the Division of Materials Research of the Directorate for Mathematical and Physical Sciences.
- Proposals that focus on the generation of thermal energy by solar radiation may be considered by the Thermal Transport Processes program(CBET 1406).
Innovative proposals outside of these specific interest areas may be considered. However, prior to submission, it is recommended that the PI contact the program director to avoid the possibility of the proposal being returned without review.
INFORMATION COMMON TO MOST CBET PROGRAMS
Proposals should address the novelty and/or potentially transformative nature of the proposed work compared to previous work in the field. Also, it is important to address why the proposed work is important in terms of engineering science, as well as to also project the potential impact on society and/or industry of success in the research. The novelty or potentially transformative nature of the research should be included, as a minimum, in the Project Summary of each proposal.
The duration of unsolicited proposal awards in CBET is generally up to three years. Single-investigator award budgets typically include support for one graduate student (or equivalent) and up to one month of principal investigator time per year (awards for multiple investigator projects are typically larger). Proposal budgets that are much larger than typical should be discussed with the Program Director prior to submission. Proposers can view budget amounts and other information from recent awards made by this program via the “What Has Been Funded (Recent Awards Made Through This Program, with Abstracts)” link towards the bottom of this page.
Faculty Early Career Development (CAREER) program proposals are strongly encouraged. Award duration is five years. The submission deadline for Engineering CAREER proposals is in July every year. Learn more in the CAREER program description.
Proposals for Conferences, Workshops, and Supplements: PIs are strongly encouraged to discuss their requests with the Program Director before submission of the proposal.
Grants for Rapid Response Research (RAPID) and EArly-concept Grants for Exploratory Research (EAGER) are also considered when appropriate. Please note that proposals of these types must be discussed with the program director before submission. Grant Opportunities for Academic Liaison with Industry (GOALI) proposals that integrate fundamental research with translational results and are consistent with the application areas of interest to each program are also encouraged. Please note that RAPID, EAGER, and GOALI proposals can be submitted anytime during the year. Details about RAPID, EAGER, and GOALI are available in theProposal & Award Policies & Procedures Guide (PAPPG), Part 1, Chapter II, Section E: Types of Proposals.
COMPLIANCE: Proposals which are not compliant with the Proposal & Award Policies & Procedures Guide (PAPPG) will be returned without review.