This document has been archived and replaced by NSF 18-571.
Advanced Technological Education (ATE)
National Science Foundation
Full Proposal Deadline(s) (due by 5 p.m. submitter's local time):
October 05, 2017
October 04, 2018
October 03, 2019
The funding duration and size of award for the Centers Track has been changed. The types of centers supported has been changed to "Centers" and "Resource Centers". A center budget maximum is $5 million over five years with the possibility of one renewal. A center may transition to a resource center, and the budget maximum is $600,000 over three years with the possibility of one renewal.
The maximum budget for projects has been changed. Budgets range from $225,000 to $600,000 total maximum budget.
Additional project focus areas in Adaptation and Implementation and Instrumentation Acquisition have been added.
Regarding the small, new to ATE focus areas, eligibility requirements have been changed to allow institutions that have not received an ATE award in the past seven years (from the award start date) to submit proposals.
Developers are strongly encouraged to use an open licensing approach for any new learning materials and computer software source code when these materials are developed as a component of the proposed project (see text under "Reporting Requirements").
Any proposal submitted in response to this solicitation should be submitted in accordance with the revised NSF Proposal & Award Policies & Procedures Guide (PAPPG) (NSF 18-1), which is effective for proposals submitted, or due, on or after January 29, 2018.
Advanced Technological Education (ATE)
Synopsis of Program:
With an emphasis on two-year colleges, the Advanced Technological Education (ATE) program focuses on the education of technicians for the high-technology fields that drive our nation's economy. The program involves partnerships between academic institutions and industry to promote improvement in the education of science and engineering technicians at the undergraduate and secondary school levels. The ATE program supports curriculum development; professional development of college faculty and secondary school teachers; career pathways; and other activities. The program invites research proposals that advance the knowledge base related to technician education. It is expected that projects be faculty driven and that courses and programs are credit bearing although materials developed may also be used for incumbent worker education.
The ATE program encourages partnerships with other entities that may impact technician education. For example, with
- the National Institute of Standards and Technology (NIST) Manufacturing Extension Partnerships (MEPs) http://www.nist.gov/mep/index.cfm as applicable to support technician education programs and the industries they serve;
- Manufacturing USA Institutes https://manufacturing.gov/nnmi-institutes/ and Investing in Manufacturing Communities of Practice (IMCPs) https://www.eda.gov/imcp/ addressing workforce development issues (also see DCL NSF 16-007); and
- NSF Industry & University Cooperative Research Program (I/UCRC) awardees. https://www.nsf.gov/eng/iip/iucrc/.
The ATE program encourages proposals from Minority Serving Institutions and other institutions that support the recruitment, retention, and completion of students underrepresented in STEM in technician education programs that award associate degrees. NSF is particularly interested in proposals from all types of Minority Serving Institutions (including Hispanic Serving Institutions, Historically Black Colleges and Universities, Tribal Colleges and Universities, and Alaska Native and Native Hawaiian Serving Institutions) where the proportion of underrepresented students interested in advanced technology careers is growing.
Cognizant Program Officer(s):
Please note that the following information is current at the time of publishing. See program website for any updates to the points of contact.
Applicable Catalog of Federal Domestic Assistance (CFDA) Number(s):
Anticipated Type of Award: Standard Grant or Continuing Grant
Estimated Number of Awards: 45 to 75
Anticipated Funding Amount: $59,000,000 is anticipated to be available for new and continuing awards in this program in FY2018. Funding in all years is subject to the availability of funds.
Who May Submit Proposals:
The categories of proposers eligible to submit proposals to the National Science Foundation are identified in the NSF Proposal & Award Policies & Procedures Guide (PAPPG), Chapter I.E.
Who May Serve as PI:
There are no restrictions or limits.
Limit on Number of Proposals per Organization:
There are no restrictions or limits.
Limit on Number of Proposals per PI or Co-PI:
There are no restrictions or limits.
A. Proposal Preparation Instructions
B. Budgetary Information
Inclusion of voluntary committed cost sharing is prohibited.
Other budgetary limitations apply. Please see the full text of this solicitation for further information.
C. Due Dates
October 05, 2017
October 04, 2018
October 03, 2019
Merit Review Criteria:
National Science Board approved criteria. Additional merit review considerations apply. Please see the full text of this solicitation for further information.
Standard NSF award conditions apply.
Additional reporting requirements apply. Please see the full text of this solicitation for further information.
The Advanced Technological Education (ATE) program promotes improvement in the education of science and engineering technicians at the undergraduate and the secondary school levels. Proposals to the program may aim to affect specialized technology courses or core science, mathematics, and technology courses that serve as immediate prerequisites or co-requisites for specialized technology courses/programs. The curricular focus and the activities of all projects should demonstrably contribute to the ATE program's central goals: producing more qualified science and engineering technicians to meet workforce demands, and improving the technical skills and the general science, technology, engineering, and mathematics (STEM) preparation of these technicians and the educators who prepare them. To this end, it is expected that courses developed or updated will be credit-bearing courses although materials may also support incumbent worker education.
The ATE program focuses on colleges that award two-year degrees in advanced technology fields and expects these colleges and their faculty to have significant leadership roles on all projects. Effective technological education programs should involve partnerships in which two-year institutions work with four-year institutions, secondary schools, business, industry, economic development agencies, and government. The partnerships and collaborations should respond to employers' hiring needs for highly-skilled technicians with the ability to learn and embrace change. Projects that focus on secondary teachers and students must demonstrate a clear pathway to a two-year technician education program.
Fields of technology supported by the ATE program include, but are not limited to, advanced manufacturing technologies, agricultural and bio-technologies, energy and environmental technologies, engineering technologies, information technologies, micro- and nano-technologies, security technologies, geospatial technologies, and applied research on technician education that informs all supported areas. The ATE program is interested in projects addressing issues in rural technician education and projects that broaden the diversity of the entry-level technical workforce including strategies to recruit veterans into technician education programs. The ATE program does not support projects that focus on students who will become health, veterinary, or medical technicians.
Activities may have either a national or a regional focus, but not a purely local one as results and outcomes should be applicable to a broad community. Projects must, however, have an institutional impact and make a case that graduates with these skills will have a measurable impact on the local workforce. All projects must be guided by a coherent vision of technological education--a vision that recognizes technicians as life-long learners together with the needs of the modern workplace, including employability skills, and the articulation of educational programs at different levels.
The ATE program supports projects, centers, and targeted research on technician education. A project or center is expected to communicate a realistic vision and an achievable plan for sustainability. It is expected that at least some aspects of both centers and projects will be sustained or institutionalized past the period of award funding. Being sustainable means that a project or center has developed a product or service that the host institution, its partners, and its target audiences want continued.
To be sustainable is to ensure a center's or project's products and services have a life beyond ATE funding. For example:
The almost 1,600 ATE projects and centers supported to date provide a base upon which future ATE projects should build. Information about these projects can be found on the NSF web site using the ATE& program element code of 7412 in the awards search function (https://www.nsf.gov). ATE Central (http://www.atecentral.net) directs users to a full range of high-impact ATE resources available online, including curricula, learning objects, and podcasts. The ATE Centers website (http://www.atecenters.org/) provides information about resources that projects may wish to adapt. The South Carolina Advanced Technological Education (SCATE) Center hosts a website of interest to the ATE community (http://teachingtechnicians.org). The Advanced Technological Education TV project (ATETV) is another resource for those interested in technician education (http://www.atetv.org/). The EvaluATE Center at Western Michigan University partners with ATE projects and centers to expand their use of exemplary evaluation practices, strengthen the knowledge base of the ATE program about evaluation and support the continuous improvement of technician education throughout the nation (http://www.evalu-ate.org/). Past program annual survey results may also be found at the ATE Centers site. The ATE program has also supported several studies by the National Academies of Science, and these may be found on the Academies website (http://www.nap.edu). The studies include "Community Colleges in the Evolving STEM Education Landscape", "Engineering Technology Education in the United States", and "Building America's Skilled Technical Workforce".
A. PROGRAM TRACKS
The ATE program supports proposals in three major tracks: Projects, Centers, and Targeted Research on Technician Education.
Proposals in all tracks should demonstrate a thorough awareness of previous relevant ATE grants, research on effective technician education, and contemporary developments in the relevant field(s) of technology. Whenever feasible, projects should utilize and innovatively build upon successful educational materials, courses, curricula, strategies, and methods that have been developed through other ATE grants, as well as other exemplary resources (including those not supported by NSF) that can be adapted to technological education. Proposers should contact the Principal Investigators (PIs) of previously funded projects and centers to explore the possibilities for adapting materials, evaluating materials, receiving guidance, or collaborating in other ways, such as conducting research projects that focus on the effectiveness of technician education.
1. ATE PROJECTS
ATE Projects focus on one or a few of the focus areas described below. Multifaceted projects that cut across some of these areas are encouraged.
Program Development and Improvement: These projects should increase the relevance of technician education to modern practices and assure an increased number of students with an enhanced STEM theoretical understanding and technical skills and competencies entering the high performance workplace. Proposed activities should produce a coherent sequence of classes, laboratories, and work-based educational experiences that revitalize the learning environment, course content and technical experiences for students preparing to be science and engineering technicians. Employers must be committed partners, and the resulting program should constitute a model that could be disseminated broadly. The program should lead students to an appropriate associate degree or specific occupational competency or certification, provide business and industry and public sector agencies with a larger pool of skilled technicians, and support student recruitment, retention, and completion of programs. The PI should articulate clear project goals and objectives, and the evaluative activities should be tied to the goals and objectives.
A program development and improvement proposal might include:
Curriculum and Educational Materials Development: A project may also focus on curriculum and materials development with the intent of broadly disseminating the developed products. Proposed project activities should affect the learning environment, course content, and experience of instruction for students preparing to be science and engineering technicians and for their teachers. Projects may develop new print, electronic, and multimedia materials, including simulations, scenarios, and web-based collections as well as laboratory experiments and manuals. It is expected that products will be developed with input from business, industry, and government, validated by experts from these organizations, field tested in diverse locations, and validated in terms of their effectiveness in meeting learning goals.
Professional Development for Educators: ATE supports projects that provide current secondary school teachers and college faculty with opportunities for continued professional growth in areas that directly impact technician education. These projects should be designed to enhance the educators' disciplinary capabilities, teaching skills, understanding of current technologies and practices, and employability skills. Activities typically include workshops, intensive seminars, industry internships, or a combination of these. Such activities typically last from a few days to several weeks and are usually conducted in the summer, with follow-on activities conducted during the academic year. To effect long-term change, workshop participants should demonstrate institutional support. The program particularly encourages activities that involve secondary school teachers and two-year college faculty working together. One effective strategy has been to bring teachers and faculty back together during a subsequent summer. Returning participants may serve as mentors for first-time participants. Additionally, the program encourages activities that provide pedagogical skills to industry scientists and tradespeople who wish to teach. Evaluation should demonstrate use in the classrooms and sustainable changes in practice of participating faculty and teachers leading to more qualified technicians for the industry. Changes in student learning outcomes as well as students' perceptions of technical careers should be assessed. As with all ATE projects, two year faculty must be in leadership roles and it is expected that all professional development activities include business and industry partners to assure that the faculty and teacher training is relevant and tied to workforce needs.
Leadership Capacity Building for Faculty: The vitality and growth of the ATE community is closely linked to industry trends and needs as well as the acumen of the PIs and their institutions who educate technicians. As such, faculty must: 1) work with their institutional administration, 2) effectively manage both programs and project/center activities, 3) maintain industry connections that include local, statewide, and national economic development efforts, and 4) maintain and cultivate networks with other grantees across funding agencies. Activities that foster these skills might include:
Teacher Preparation: The foundation for advanced technological education is grounded in strong mathematics, science, engineering, and technology (STEM) education in K-12 schools. The preparation of future STEM and career and technical education (CTE) teachers who will facilitate student learning in mathematics and science and cultivate an interest in technological careers is an important component of the ATE program. ATE teacher preparation projects help prepare a future teaching workforce that is skilled in teaching science and mathematics, understands the technological workplace, and can prepare students to use a variety of approaches to solving real world technology related problems using design processes and principles (See Standards for Technological Literacy, ITEEA).
Teacher Preparation projects must involve both two-year and four-year institutions unless the two-year institution offers a four-year baccalaureate program in teacher preparation. Projects should aim to increase the number, quality, and diversity of prospective STEM and/or CTE teachers in pre-service or paraprofessional programs. These projects are expected to improve the prospective teachers' technological understanding; provide them with experiences to use in engaging students in real world technological problems; improve their understanding of the modern workplace; and strengthen their preparation in science and mathematics. These projects are expected to build on the extensive research literature on teacher preparation. Two-year colleges have the unique advantage of having technology faculty, connected with the high performance workplace, who can work with mathematics and science faculty in developing and teaching these programs.
Business and Entrepreneurial Skills Development for Students: In addition to technical skills and disciplinary content, students entering the industry environment need skills that allow them to understand and work effectively in this environment. Many companies have a global presence, and students need to understand that the global economy affects them as employees. Another sector of the industry is comprised of small start-up companies, and these have different attributes than large established firms. Students need to understand these attributes and differences to be effective employees.
Employers often expect employees to possess knowledge, skills and competencies in a specific technical area and to demonstrate professional, industry-related, and entrepreneurship acumen. Business and entrepreneurship skills can be developed in students in technician education programs by engaging students in problem-based learning using projects of interest to local industry, working with local economic investment organizations, and by developing incubator programs that provide experiences for students to interact with entrepreneurs. Projects are encouraged that:
ATE Coordination Networks: The goal of the ATE coordination networks (ATE-CN) is to advance a field or create new directions in technician education by supporting faculty, industry, and other stakeholders to communicate and coordinate their research, training and educational activities across disciplinary, organizational, geographic and international boundaries. ATE-CN provides opportunities to foster new collaborations, including international partnerships, and address interdisciplinary topics. Innovative ideas for implementing novel networking strategies, collaborative technologies, and adaptation and implementation of industry-relevant curricula and best practices across disciplinary/technical areas are encouraged. ATE-CN awards are not meant to support existing networks, nor are they meant to support the activities of established collaborations.
ATE-CN supports the means by which faculty can share information and ideas, foster synthesis and new collaborations, develop common standards or industry-validated certifications, and in other ways advance science and technician education through communication and sharing of ideas. In preparing a proposal for this area it is important to briefly describe existing collaborative networks and then clearly describe the new networks to be developed. Proposals should describe expected outcomes on students in technician education programs as well as impacts on institutions and faculty.
Proposed networking activities for the ATE-CN should focus on a theme to give coherence to the collaboration, such as particular technologies or approaches or a broad research question.
Possible ATE-CN projects:
Small Grants for Institutions New to the ATE Program: This focus area seeks to increase the incentives and opportunities for community colleges that have little or no previous experience with the ATE program to undertake projects to improve science and engineering technician education programs or teacher preparation programs that focus on technological education. This small grants opportunity is designed to stimulate implementation, adaptation, and innovation in all areas supported by the ATE program and to broaden the base of community colleges participating in the program. Proposers are strongly encouraged to utilize resources developed by other ATE or NSF awardees and to consult with people from these projects and centers. Prospective PIs are encouraged to provide sufficient detail on what is being proposed to clearly inform both reviewers and NSF staff.
It is expected that some of the funded projects in this category will serve as a prototype or pilot for an idea that may be expanded in a future proposal for an ATE project. The ATE program is particularly interested in projects addressing issues in rural technician education.
Only community college campuses that have not had an ATE award within the past 7 years may be the "performing organization" on a proposal in this category. It is acceptable for a system administrative office or other governing organization to submit the proposal and be the "awardee organization," even if that organization has received a previous ATE award. But the campus that is the "performing organization" must not have been the performing organization on an ATE award within the past 7 years and must be geographically distinct and have its own chief academic officer. (Note: community colleges that have had an ATE award within the past 7 years and other institutions may still submit a proposal for a small project under the other categories of ATE Project grants.)
Adaptation and Implementation (A&I): This focus area has been designed to increase the pace of innovation diffusion and encourages the use of innovative materials and practices of demonstrated effectiveness in courses and programs. A successful proposal must provide evidence that the innovative materials and practices have been effective at other named institutions and provide realistic implementation plans that explain why the materials and practices are anticipated to be effective for the students enrolled at the applicant's campus. ATE Central may provide important resources to consider for use in this focus area. The outcomes of the adaptation and implementation at a new site must be disseminated to add to the knowledge base relating to the materials and practices. Project scope may range from improvements in an individual course or laboratory to a more comprehensive effort that impacts entire curricula or programs. This track will support such activities as:
Instrumentation Acquisition with curricular modifications to support the instrumentation: This focus area seeks to support existing programs that, in partnership with industry, have identified new instrumentation needs. In addition to justifying the need to update instrumentation, the proposal should clearly describe the curricular modifications that will be developed to support the student gain in knowledge, competencies and skills that relate to the changing technical workplace. It is expected that the industry partner(s) will collaborate with faculty on the new curriculum modules or courses. In addition to instrumentation costs, faculty may request support for developing the supporting materials for inclusion of the instruments in the program. The proposal must demonstrate that the use of this new instrumentation will better prepare students to work in business and industry, and address the numbers of students who will be utilizing the instrument and how the impact on their learning will be assessed.
2. ATE CENTERS
The ATE program recognizes the need to develop an integrated approach to technician education that will define and disseminate the critical knowledge and skills required to support the advanced technology industries in the US. To facilitate this integrated approach, the ATE program will support up to ten centers. A center may be supported in the following areas: Advanced manufacturing technologies, Agricultural technologies, Biotechnology, Energy technologies, Environmental technologies, Engineering technologies, Information technologies, Security technologies, Micro- and Nano-technologies, and an emerging advanced technology field, justified by the potential for career opportunities for two-year college graduates. Proposals for centers must clearly articulate a vision of technological education and must describe a workable plan for achieving that vision during the period of NSF funding as well as describing a plan for sustaining a subset of activities post-award. A part of the center vision must be a plan to coordinate all ATE project awardees within their disciplinary area to maximize knowledge transfer and broadly inform the community of industry workforce needs. Center proposals must also propose an effective set of industry-valued certifications for integration into advanced technician education academic programs where applicable.
Typically, centers are recognized as leaders in a particular field or technology based on significant prior efforts. A pathway to a center may begin with several successful projects and then progress to a center proposal. Proposals for a center must build upon prior efforts of both project personnel and others in the field. As the program has reduced the numbers of centers, existing centers may work together to prepare a proposal for a given center area, but current centers that have exceeded 10 years of ATE funding are not eligible to submit a new center proposal. A center proposal must clearly describe impacts on the industry and technician education programs at the national, regional, and local levels as well as institutional impacts, and provide detail as to how the center will coordinate all stakeholders (other ATE awardees, industry, other partners). ATE centers are expected to provide models and leadership for collaborations in which two-year institutions work with four-year institutions, secondary schools, business, industry, economic development agencies, and government. It is expected that a center will seek a variety of sources of support after the award is made including support from the proposing educational institution or consortium and employers to ensure future sustainability. The sustainability plan will be critically reviewed for renewals. Information about the internal and external resources that will be made available to the project should be described in the Facilities, Equipment, and Other Resources section of the proposal.
Proposals for centers must include a letter from the president or chief academic officer of the host institution documenting the institution's commitment to the center. The "Center/Research Infrastructure" proposal type should be selected in the proposal preparation module in FastLane or Grants.gov.
Centers have a carefully articulated mission that advances the ATE program's mission. Center proposals should:
Centers must have a national impact and visibility in the technological fields they address catalyzing a broad network of academic institutions and industry partners. All of the partners are expected to collaborate to improve technological education. The evaluation plan for a center should provide evidence of impacts on institutions, faculty, students, industry, and coordinating efforts with ATE projects in their disciplinary area.
Groups of institutions contemplating a proposal for a center should make early contact with one of the ATE Lead Program Directors to discuss their ideas.
Centers are funded for five years, after which they are eligible for a competitive grant renewal for another five years. Not only must significant results be documented, but lessons learned that lead to new goals and activities must be detailed. The ATE program anticipates publishing a Dear Colleague Letter (DCL) to alert the community to the center areas that will be open for proposal submission on a yearly basis.
Resource Center: The ATE program recognizes the importance of continuing to support existing centers such that they may continue to impact and contribute to the fields of technician education. After 10 years, ATE centers may submit a proposal that describes a plan to continue a subset of center practices along with new objectives that will support technological education in their respective field. These centers will be termed "Resource Centers" and they will be expected to:
Center Planning Grant: The ATE program also offers planning grants for centers. (See Section III. Award Information and Section V. Proposal Preparation and Submission Instructions for further information.)
3. Targeted Research on Technician Education
The goals of this track are: 1) to simulate and support research on technician education in established and emerging advanced technology fields in STEM, and 2) to build the partnership capacity between 2-year and 4-year institutions and universities with industry input to design and conduct research and development projects. The ATE research track seeks applied research and research and development projects that investigate issues related to the education and workforce development of middle skills technicians in STEM-oriented fields. The program supports a broad range of research methodologies, which are guided by research questions addressing current and emerging issues and gaps in the knowledge base in technician education and STEM workforce development. Proposals are particularly encouraged that address immediate challenges and opportunities facing the development of high quality technicians for the nation's established and emerging STEM workforce, as well as those that anticipate new structures (e.g., new methods for certification or credentialing recognized by industry; program and course re-conception; long-standing or emerging issues, such as recruitment, retention and attainment of degrees and credentials; cognitive and non-cognitive factors that influence academic and career success; and emerging careers and pathways and the need for new or adapted resources for attaining required knowledge and skills). Exemplary efforts include strong partnerships among practitioners at two-year institutions, industry, and researchers and focus on issues that concern practitioners and stakeholders. Results and findings from ATE research projects, in turn, contribute to NSF's and EHR's efforts that focus attention on STEM workforce development and emerging STEM fields, and increasing participation and persistence in STEM, especially by members of underrepresented and underserved groups.
Projects must clearly demonstrate that two-year institutions have leadership roles. All projects must include a literature review that establishes the basis for the proposed study; a clear description of the alignment of research questions with methodologies; and be informed by the Common Guidelines for Education Research and Development https://www.nsf.gov/publications/pub_summ.jsp?ods_key=nsf13126.
This track supports three levels of research efforts (these include applied research and research and development).
Examples of funded targeted research projects may be found on the NSF website using the awards search tool.
Investigators who are interested in conducting a targeted research project are strongly encouraged to discuss their plans with a program officer prior to submission.
4. Conferences and Workshops: The ATE program supports a small number of conferences, workshops, and special projects that lead to a better understanding of issues in advanced technological education. These efforts must be related to the mission of the ATE program. Budgets for conferences and workshops are expected to be consistent with the duration of the event, and the number of participants, but the cost will normally not exceed a total of $250,000. It is expected that the conferences and workshops will be outcome based, and that the final report should contain a statement of the impacts of the event. A proceedings of the conference is expected to be published and widely disseminated. Proposals for conferences and workshops may be submitted at any time during the year, but the proposers should plan on at least a 10 month lead time to allow for review and processing of the proposal. A prospective PI is encouraged to contact an ATE program officer to discuss the conference or workshop prior to submitting a proposal. The "Conference" proposal type should be selected in the proposal preparation module in FastLane or Grants.gov. Additional information about the preparation of conference proposals is available in Chapter II.E.7 of the PAPPG.
B. INFORMATION ABOUT PREVIOUS AWARDS
NSF anticipates that approximately $59.0 million will be available for new and continuing awards in this program in FY2018. In FY 2018, the ATE program expects to fund new awards totaling $57,000,000 million.
Funding in all years is subject to the availability of funds. The program expects to make 45-75 new awards per year. Grants may be awarded in a wide variety of sizes and durations, as summarized below. The categories below are expected to encompass most of the activities supported through the ATE program; however, additional activities and mechanisms may be proposed after consultation with an NSF program officer. The actual number of awards and the award sizes are subject to the availability of funds and the quality of proposals received.
Anticipated number, size, and duration of new awards:
Who May Submit Proposals:
The categories of proposers eligible to submit proposals to the National Science Foundation are identified in the NSF Proposal & Award Policies & Procedures Guide PAPPG), Chapter I.E.
Who May Serve as PI:
There are no restrictions or limits.
Limit on Number of Proposals per Organization:
There are no restrictions or limits.
Limit on Number of Proposals per PI or Co-PI:
There are no restrictions or limits.
Full Proposal Preparation Instructions: Proposers may opt to submit proposals in response to this Program Solicitation via Grants.gov or via the NSF FastLane system.
In determining which method to utilize in the electronic preparation and submission of the proposal, please note the following:
Collaborative Proposals. All collaborative proposals submitted as separate submissions from multiple organizations must be submitted via the NSF FastLane system. PAPPG Chapter II.D.3 provides additional information on collaborative proposals.
See PAPPG Chapter II.C.2 for guidance on the required sections of a full research proposal submitted to NSF. Please note that the proposal preparation instructions provided in this program solicitation may deviate from the PAPPG instructions.
The following instructions for particular sections of the proposal supplement or deviate from the guidance found in the PAPPG and the NSF Grants.gov Application Guide.
Project Data Form: The information on this form is used to direct the proposal to appropriate reviewers and to determine the characteristics of NSF-supported projects. Take special care to identify the proper track for your proposal in Item 1 on the form. For any audience code(s) marked in Item F (e.g., women, minorities, persons with disabilities), include in the Project Description a substantive discussion of the specific strategies that the project will employ to affect the audience(s). Note: In FastLane, the Project Data Form will show up in the list of forms for your proposal only after you have (1) selected the correct Program Announcement/Solicitation No. on the Cover Sheet and (2) saved the Cover Sheet. Grants.gov users should refer to Section VI.5. of the NSF Grants.gov Application Guide for specific instructions on how to submit the DUE Project Data Form.
Project Summary: The Project Summary should clearly indicate, in the overview text box, the disciplinary focus (or foci) of the proposed project, the kinds of activities to be undertaken (e.g. educational materials development, adaptation and implementation, professional development for educators), and the primary audience to be affected by those activities (e.g., two-year college students, secondary school students, two-year college faculty members, secondary school teachers). This information is used to assign the proposal to a panel for review. Full proposals that do not address both merit review criteria in the separate text boxes will not be accepted or will be returned without review.
Project Description: The length of the Project Description is limited to 15 pages. The Project Description must begin with the subsection on Results from Prior NSF Support, and this subsection should only cover awards pertaining to the new proposal. Awards from other sources that directly impact the proposed work should also be included (e.g. Dept. of Labor TAACCCT). This subsection must contain specific outcomes and results including metrics to demonstrate the impact of the project activities.
Center renewals and current centers transitioning to a resource center may submit up to five-pages of Prior Support in the Supplementary Documents. The first section of the Project Description should provide a few sentence overview of past results and direct the reader to the supplementary documents for the complete description of Results of Past Support.
The Project Description must explain the project's motivating rationale, goals, objectives, deliverables, and activities; the timetable; the management plan; the roles and responsibilities of the PI, co-PI(s), and other senior personnel; the plan for sustainability after the period of NSF funding; the evaluation plan; and the dissemination plan. Submission of the evaluation plan in supplementary documents is not allowable and such proposals will be subject to return without review as they will not meet the 15-page project description requirement. For information about effective approaches to evaluation, see the following resources:
The EvaluATE Center (http://www.evalu-ate.org)
References Cited: A References Cited page must be included in the proposal. Literature cited should specifically relate to the proposed project, and the Project Description should make clear how each reference has played a role in the motivation for or design of the project. Relevant literature on research in teaching and learning as well as relevant literature on technical education efforts should be cited. If no references are cited the page should state that no references were cited.
Facilities, Equipment and Other Resources: Proposers should include an aggregated description of the internal and external resources (both physical and personnel) that the organization and its collaborators will provide to the project, should it be funded. Such information must be provided in this section, in lieu of other parts of the proposal (e.g., budget justification, project description). The description should be narrative in nature and must not include any quantifiable financial information. See PAPPG for additional information.
Special Information and Supplementary Documentation:
The addition of other documents in this section will result in the proposal being returned without review.
Additional Guidance for Planning Grant for Center Proposals: On the Cover Sheet of the proposal, the project title should begin with the words "Planning Grant for...." Planning grants are reserved for planning for a center. A proposal for a planning grant should clearly describe the activities that will take place during the planning period. It should also provide details about the workforce demands that the planning grant will address, the organizations and departments that will be (or will likely be) partners in the project, the core faculty members or administrators who will manage the project, and the criteria that will be used to judge the proposer's readiness to form an ATE center at the end of the planning period. The proposal should also outline plans for identifying and enlisting faculty from two-and four-year institutions and representatives from business, industry and public sector agencies to provide leadership for the various activities of the project or center. Planning-grant proposals need not present plans for evaluation and dissemination.
Additional Information: Certain special types of proposals described in the PAPPG — i.e., Grants for Rapid Research Response (RAPID) proposals and EArly Grants for Exploratory Research (EAGER) proposals, and Accomplishment-Based Renewal (ABR) proposals are not appropriate for the ATE program and should not be submitted in response to this solicitation.
Inclusion of voluntary committed cost sharing is prohibited.
Other Budgetary Limitations:
Funds requested for equipment and instrumentation (computers, computer-related hardware, software, laboratory or field instrumentation, and scientific or industrial machinery) normally may not exceed $200,000 for the duration of a full project grant. Exceptions to this limit will be considered when a single piece of equipment costs in excess of the maximum allowable request, and the need for the equipment is justified in terms of student use and learning outcomes. The new project focus area, Instrumentation Acquisition, may exceed the $200,000 limitation if the equipment request is supported by industry. Equipment requests for small, new to ATE projects should be within the overall scope of the project budget. It is expected that the proposer will request educational discounts from the equipment supplier, and that any discount will be explained in the budget justification. NSF funds may not be used to support expenditures that would normally be made in the absence of an award, such as costs for routine teaching activities (including curriculum development) and laboratory upgrades (supplies and computers). Budget requests should also follow the guidance in the 2 CFR § 200.413. The pertinent language is included here: "The salaries of administrative and clerical staff should normally be treated as F&A costs."
NSF project funds may not be used for:
Professional Development Workshops: In proposals that involve professional development workshops, reasonable travel costs and costs for subsistence (lodging and meals) during the workshop may be included in project budgets. In addition, funds may be requested for a reasonable stipend per workshop day for participants; requests for such stipends must be specific to the target audience and must be fully justified--for example, to assure participation by faculty with few professional development opportunities or from institutions that justify need.
The use of NSF funds to hire substitute teachers is allowed under the following conditions: (1) it is necessary to meet the goals and objectives of the project; and (2) it can be documented that the substitute teachers are directly replacing teachers participating in the NSF-funded project. Substitute teachers should be paid in accordance with established school district policies, and in lieu of paying the teachers participating in the project. Records must be maintained on the hiring and use of substitutes.
Extra Compensation Above Base Salary. Please follow 2 CFR § 200.430. Extra service pay normally represents overload compensation, subject to institutional compensation policies above and beyond the Institutional Base Salary (IBS). The institution must have written policies that apply uniformly to all faculty, not just those working on a federal award.
National Visiting Committee: For ATE center proposals, the budget should include provisions for a National Visiting Committee (NVC) to visit the center at least on an annual basis. An NVC is a group of experts who provide advice to the project staff, assess the plans and progress of the project (and make reports both to the project leadership and to NSF), and enhance the dissemination of the project's products. Typically, ATE Centers enlist eight to ten members. The proposal should include only the names of NVC members who have agreed to serve should an award be made. After an award is made, an NSF program officer will work with the grantee to finalize NVC membership. The proposal should address how the NVC will be used in the project.
Evaluation: All ATE-funded work must be evaluated, with the exception of planning grants for centers. Project descriptions must include a subsection titled "Evaluation Plan" that includes the following information:
There must be clear alignment between the evaluation plan and the project's intended outcomes, activities, and deliverables.
The funds to support an evaluator independent of the project must be requested. The requested funds must match the scope of the proposed evaluative activities. The evaluator may be employed by a project's home institution, as long as he or she works in a separate organizational unit (e.g., a different department) that has a different reporting line than that of the project's home unit. The project should engage project staff, project participants, or an internal evaluator to work with the external evaluator as a means to improve the quality of data collected and feasibility of conducting the evaluation.
It is recommended that the evaluator be named in the proposal and a biosketch included with the proposal's supplementary documents. If the proposer's institution requires evaluation consultants to be selected through a competitive bid process after an award is made, the proposer should note the institutional policy that prohibits noncompetitive selection and describe the procedures that will be used to select an evaluator after the award is made.
Special Information for the Evaluation of Targeted Research Projects: Targeted research projects may be evaluated by an external review committee, rather than a single external evaluator. Whether by committee or individual evaluator, the evaluation of targeted research projects should include review and feedback on data collection procedures, analyses, draft publications, and dissemination plans to ensure quality and enhance the impact of the research.
ATE PI Conference: The budget must include funds to support travel to the annual ATE PI Conference. Lodging is covered by the American Association of Community Colleges for a specified number of people from each project and center. All awardees are to showcase annually at the ATE PI Conference.
October 05, 2017
October 04, 2018
October 03, 2019
For Proposals Submitted Via FastLane:
To prepare and submit a proposal via FastLane, see detailed technical instructions available at: https://www.fastlane.nsf.gov/a1/newstan.htm. For FastLane user support, call the FastLane Help Desk at 1-800-673-6188 or e-mail firstname.lastname@example.org. The FastLane Help Desk answers general technical questions related to the use of the FastLane system. Specific questions related to this program solicitation should be referred to the NSF program staff contact(s) listed in Section VIII of this funding opportunity.
For Proposals Submitted Via Grants.gov:
Before using Grants.gov for the first time, each organization must register to create an institutional profile. Once registered, the applicant's organization can then apply for any federal grant on the Grants.gov website. Comprehensive information about using Grants.gov is available on the Grants.gov Applicant Resources webpage: http://www.grants.gov/web/grants/applicants.html. In addition, the NSF Grants.gov Application Guide (see link in Section V.A) provides instructions regarding the technical preparation of proposals via Grants.gov. For Grants.gov user support, contact the Grants.gov Contact Center at 1-800-518-4726 or by email: email@example.com. The Grants.gov Contact Center answers general technical questions related to the use of Grants.gov. Specific questions related to this program solicitation should be referred to the NSF program staff contact(s) listed in Section VIII of this solicitation.
Submitting the Proposal: Once all documents have been completed, the Authorized Organizational Representative (AOR) must submit the application to Grants.gov and verify the desired funding opportunity and agency to which the application is submitted. The AOR must then sign and submit the application to Grants.gov. The completed application will be transferred to the NSF FastLane system for further processing.
Proposers that submitted via FastLane are strongly encouraged to use FastLane to verify the status of their submission to NSF. For proposers that submitted via Grants.gov, until an application has been received and validated by NSF, the Authorized Organizational Representative may check the status of an application on Grants.gov. After proposers have received an e-mail notification from NSF, Research.gov should be used to check the status of an application.
Proposals received by NSF are assigned to the appropriate NSF program for acknowledgment and, if they meet NSF requirements, for review. All proposals are carefully reviewed by a scientist, engineer, or educator serving as an NSF Program Officer, and usually by three to ten other persons outside NSF either as ad hoc reviewers, panelists, or both, who are experts in the particular fields represented by the proposal. These reviewers are selected by Program Officers charged with oversight of the review process. Proposers are invited to suggest names of persons they believe are especially well qualified to review the proposal and/or persons they would prefer not review the proposal. These suggestions may serve as one source in the reviewer selection process at the Program Officer's discretion. Submission of such names, however, is optional. Care is taken to ensure that reviewers have no conflicts of interest with the proposal. In addition, Program Officers may obtain comments from site visits before recommending final action on proposals. Senior NSF staff further review recommendations for awards. A flowchart that depicts the entire NSF proposal and award process (and associated timeline) is included in PAPPG Exhibit III-1.
A comprehensive description of the Foundation's merit review process is available on the NSF website at: https://www.nsf.gov/bfa/dias/policy/merit_review/.
Proposers should also be aware of core strategies that are essential to the fulfillment of NSF's mission, as articulated in Investing in Science, Engineering, and Education for the Nation's Future: NSF Strategic Plan for 2014-2018. These strategies are integrated in the program planning and implementation process, of which proposal review is one part. NSF's mission is particularly well-implemented through the integration of research and education and broadening participation in NSF programs, projects, and activities.
One of the strategic objectives in support of NSF's mission is to foster integration of research and education through the programs, projects, and activities it supports at academic and research institutions. These institutions must recruit, train, and prepare a diverse STEM workforce to advance the frontiers of science and participate in the U.S. technology-based economy. NSF's contribution to the national innovation ecosystem is to provide cutting-edge research under the guidance of the Nation's most creative scientists and engineers. NSF also supports development of a strong science, technology, engineering, and mathematics (STEM) workforce by investing in building the knowledge that informs improvements in STEM teaching and learning.
NSF's mission calls for the broadening of opportunities and expanding participation of groups, institutions, and geographic regions that are underrepresented in STEM disciplines, which is essential to the health and vitality of science and engineering. NSF is committed to this principle of diversity and deems it central to the programs, projects, and activities it considers and supports.
The National Science Foundation strives to invest in a robust and diverse portfolio of projects that creates new knowledge and enables breakthroughs in understanding across all areas of science and engineering research and education. To identify which projects to support, NSF relies on a merit review process that incorporates consideration of both the technical aspects of a proposed project and its potential to contribute more broadly to advancing NSF's mission "to promote the progress of science; to advance the national health, prosperity, and welfare; to secure the national defense; and for other purposes." NSF makes every effort to conduct a fair, competitive, transparent merit review process for the selection of projects.
1. Merit Review Principles
These principles are to be given due diligence by PIs and organizations when preparing proposals and managing projects, by reviewers when reading and evaluating proposals, and by NSF program staff when determining whether or not to recommend proposals for funding and while overseeing awards. Given that NSF is the primary federal agency charged with nurturing and supporting excellence in basic research and education, the following three principles apply:
With respect to the third principle, even if assessment of Broader Impacts outcomes for particular projects is done at an aggregated level, PIs are expected to be accountable for carrying out the activities described in the funded project. Thus, individual projects should include clearly stated goals, specific descriptions of the activities that the PI intends to do, and a plan in place to document the outputs of those activities.
These three merit review principles provide the basis for the merit review criteria, as well as a context within which the users of the criteria can better understand their intent.
2. Merit Review Criteria
All NSF proposals are evaluated through use of the two National Science Board approved merit review criteria. In some instances, however, NSF will employ additional criteria as required to highlight the specific objectives of certain programs and activities.
The two merit review criteria are listed below. Both criteria are to be given full consideration during the review and decision-making processes; each criterion is necessary but neither, by itself, is sufficient. Therefore, proposers must fully address both criteria. (PAPPG Chapter II.C.2.d(i). contains additional information for use by proposers in development of the Project Description section of the proposal). Reviewers are strongly encouraged to review the criteria, including PAPPG Chapter II.C.2.d(i), prior to the review of a proposal.
When evaluating NSF proposals, reviewers will be asked to consider what the proposers want to do, why they want to do it, how they plan to do it, how they will know if they succeed, and what benefits could accrue if the project is successful. These issues apply both to the technical aspects of the proposal and the way in which the project may make broader contributions. To that end, reviewers will be asked to evaluate all proposals against two criteria:
The following elements should be considered in the review for both criteria:
Broader impacts may be accomplished through the research itself, through the activities that are directly related to specific research projects, or through activities that are supported by, but are complementary to, the project. NSF values the advancement of scientific knowledge and activities that contribute to achievement of societally relevant outcomes. Such outcomes include, but are not limited to: full participation of women, persons with disabilities, and underrepresented minorities in science, technology, engineering, and mathematics (STEM); improved STEM education and educator development at any level; increased public scientific literacy and public engagement with science and technology; improved well-being of individuals in society; development of a diverse, globally competitive STEM workforce; increased partnerships between academia, industry, and others; improved national security; increased economic competitiveness of the United States; and enhanced infrastructure for research and education.
Proposers are reminded that reviewers will also be asked to review the Data Management Plan and the Postdoctoral Researcher Mentoring Plan, as appropriate.
Additional Solicitation Specific Review Criteria
For the ATE program, questions such as the following are often relevant to evaluating proposals in terms of NSF's merit review criteria.
Proposals submitted in response to this program solicitation will be reviewed by Panel Review.
Reviewers will be asked to evaluate proposals using two National Science Board approved merit review criteria and, if applicable, additional program specific criteria. A summary rating and accompanying narrative will generally be completed and submitted by each reviewer and/or panel. The Program Officer assigned to manage the proposal's review will consider the advice of reviewers and will formulate a recommendation.
After scientific, technical and programmatic review and consideration of appropriate factors, the NSF Program Officer recommends to the cognizant Division Director whether the proposal should be declined or recommended for award. NSF strives to be able to tell applicants whether their proposals have been declined or recommended for funding within six months. Large or particularly complex proposals or proposals from new awardees may require additional review and processing time. The time interval begins on the deadline or target date, or receipt date, whichever is later. The interval ends when the Division Director acts upon the Program Officer's recommendation.
After programmatic approval has been obtained, the proposals recommended for funding will be forwarded to the Division of Grants and Agreements for review of business, financial, and policy implications. After an administrative review has occurred, Grants and Agreements Officers perform the processing and issuance of a grant or other agreement. Proposers are cautioned that only a Grants and Agreements Officer may make commitments, obligations or awards on behalf of NSF or authorize the expenditure of funds. No commitment on the part of NSF should be inferred from technical or budgetary discussions with a NSF Program Officer. A Principal Investigator or organization that makes financial or personnel commitments in the absence of a grant or cooperative agreement signed by the NSF Grants and Agreements Officer does so at their own risk.
Once an award or declination decision has been made, Principal Investigators are provided feedback about their proposals. In all cases, reviews are treated as confidential documents. Verbatim copies of reviews, excluding the names of the reviewers or any reviewer-identifying information, are sent to the Principal Investigator/Project Director by the Program Officer. In addition, the proposer will receive an explanation of the decision to award or decline funding.
Notification of the award is made to the submitting organization by a Grants Officer in the Division of Grants and Agreements. Organizations whose proposals are declined will be advised as promptly as possible by the cognizant NSF Program administering the program. Verbatim copies of reviews, not including the identity of the reviewer, will be provided automatically to the Principal Investigator. (See Section VI.B. for additional information on the review process.)
An NSF award consists of: (1) the award notice, which includes any special provisions applicable to the award and any numbered amendments thereto; (2) the budget, which indicates the amounts, by categories of expense, on which NSF has based its support (or otherwise communicates any specific approvals or disapprovals of proposed expenditures); (3) the proposal referenced in the award notice; (4) the applicable award conditions, such as Grant General Conditions (GC-1)*; or Research Terms and Conditions* and (5) any announcement or other NSF issuance that may be incorporated by reference in the award notice. Cooperative agreements also are administered in accordance with NSF Cooperative Agreement Financial and Administrative Terms and Conditions (CA-FATC) and the applicable Programmatic Terms and Conditions. NSF awards are electronically signed by an NSF Grants and Agreements Officer and transmitted electronically to the organization via e-mail.
*These documents may be accessed electronically on NSF's Website at https://www.nsf.gov/awards/managing/award_conditions.jsp?org=NSF. Paper copies may be obtained from the NSF Publications Clearinghouse, telephone (703) 292-7827 or by e-mail from firstname.lastname@example.org.
More comprehensive information on NSF Award Conditions and other important information on the administration of NSF awards is contained in the NSF Proposal & Award Policies & Procedures Guide PAPPG) Chapter VII, available electronically on the NSF Website at https://www.nsf.gov/publications/pub_summ.jsp?ods_key=pappg.
For all multi-year grants (including both standard and continuing grants), the Principal Investigator must submit an annual project report to the cognizant Program Officer no later than 90 days prior to the end of the current budget period. (Some programs or awards require submission of more frequent project reports). No later than 120 days following expiration of a grant, the PI also is required to submit a final project report, and a project outcomes report for the general public.
Failure to provide the required annual or final project reports, or the project outcomes report, will delay NSF review and processing of any future funding increments as well as any pending proposals for all identified PIs and co-PIs on a given award. PIs should examine the formats of the required reports in advance to assure availability of required data.
PIs are required to use NSF's electronic project-reporting system, available through Research.gov, for preparation and submission of annual and final project reports. Such reports provide information on accomplishments, project participants (individual and organizational), publications, and other specific products and impacts of the project. Submission of the report via Research.gov constitutes certification by the PI that the contents of the report are accurate and complete. The project outcomes report also must be prepared and submitted using Research.gov. This report serves as a brief summary, prepared specifically for the public, of the nature and outcomes of the project. This report will be posted on the NSF website exactly as it is submitted by the PI.
More comprehensive information on NSF Reporting Requirements and other important information on the administration of NSF awards is contained in the NSF Proposal & Award Policies & Procedures Guide (PAPPG) Chapter VII, available electronically on the NSF Website at https://www.nsf.gov/publications/pub_summ.jsp?ods_key=pappg.
There are two special ATE requirements. The EvaluATE Resource Center at Western Michigan University assists the ATE community in evaluating the ATE program by conducting the ATE Annual Survey. All PIs must respond annually to this survey that requests information about the number and characteristics of students and educators that have been affected by the project; the retention, graduation, and placement rates for students; the project's impact on workforce needs; awards and other measures of the quality of the project's products and activities; and other indicators of the project's effect on the quality and quantity of technicians being educated for the high-tech workplace. NSF works with the EvaluATE Center to set guidelines for the collection and reporting of data. The EvaluATE Center will be administering the annual survey through FY18. Additional information will be sent once the survey is set for subsequent years.
For the second requirement, to support project and center sustainability and data management planning and help ensure that the valuable deliverables created through ATE funding remain available after funding ends, ATE projects and centers are required to work with ATE Central to ensure those resources are archived. Specifically, projects and centers that create resources that exist at all in digital form (e.g. curriculum, professional development, and recruitment materials) must provide copies of those resources to ATE Central for archiving purposes, in an achievable format and with clear intellectual property information. Details on archiving can be found on the ATE Central website (http://atecentral.net/archiving). Projects and centers are encouraged to work with ATE Central early in their funding period to develop a plan for preparing and migrating copies of their materials for archiving.
Additionally, it is suggested that the developer of new materials license all work (except for computer software source code, discussed below) created with the support of the grant under either the 3.0 Unported or 3.0 United States version of the Creative Commons Attribution (CC BY), Attribution-ShareAlike (CC BY-SA), or Attribution-NonCommercial-ShareAlike (CC BY-NC-SA) license.
These licenses allow subsequent users to copy, distribute, transmit, and adapt the copyrighted work and requires such users to attribute the work in the manner specified by the grantee. Notice of the specific license used would be affixed to the work, and displayed clearly when the work is made available online. For general information on these Creative Commons licenses, please visit http://creativecommons.org/licenses/.
It is expected that computer software source code developed or created with ATE grant funds be released under an intellectual property license that allows others to use and build upon the work. The grantee may release all new source code developed or created with ATE grant funds under an open license acceptable to the Free Software Foundation (http://gnu.org/licenses/) and/or the Open Source Initiative (http://opensource.org/licenses/).
Please note that the program contact information is current at the time of publishing. See program website for any updates to the points of contact.
General inquiries regarding this program should be made to:
For questions related to the use of FastLane, contact:
For questions relating to Grants.gov contact:
For questions about specific areas of technology or discipline proposers are encouraged to contact a Program Officer from the list below.
Geographic Information Systems/Geosciences
Information technology/Computer Science
New to ATE track
The NSF website provides the most comprehensive source of information on NSF Directorates (including contact information), programs and funding opportunities. Use of this website by potential proposers is strongly encouraged. In addition, "NSF Update" is an information-delivery system designed to keep potential proposers and other interested parties apprised of new NSF funding opportunities and publications, important changes in proposal and award policies and procedures, and upcoming NSF Grants Conferences. Subscribers are informed through e-mail or the user's Web browser each time new publications are issued that match their identified interests. "NSF Update" also is available on NSF's website.
Grants.gov provides an additional electronic capability to search for Federal government-wide grant opportunities. NSF funding opportunities may be accessed via this mechanism. Further information on Grants.gov may be obtained at http://www.grants.gov.
The National Science Foundation (NSF) is an independent Federal agency created by the National Science Foundation Act of 1950, as amended (42 USC 1861-75). The Act states the purpose of the NSF is "to promote the progress of science; [and] to advance the national health, prosperity, and welfare by supporting research and education in all fields of science and engineering."
NSF funds research and education in most fields of science and engineering. It does this through grants and cooperative agreements to more than 2,000 colleges, universities, K-12 school systems, businesses, informal science organizations and other research organizations throughout the US. The Foundation accounts for about one-fourth of Federal support to academic institutions for basic research.
NSF receives approximately 55,000 proposals each year for research, education and training projects, of which approximately 11,000 are funded. In addition, the Foundation receives several thousand applications for graduate and postdoctoral fellowships. The agency operates no laboratories itself but does support National Research Centers, user facilities, certain oceanographic vessels and Arctic and Antarctic research stations. The Foundation also supports cooperative research between universities and industry, US participation in international scientific and engineering efforts, and educational activities at every academic level.
Facilitation Awards for Scientists and Engineers with Disabilities (FASED) provide funding for special assistance or equipment to enable persons with disabilities to work on NSF-supported projects. Seethe NSF Proposal & Award Policies & Procedures Guide (PAPPG) Chapter II.E.6 for instructions regarding preparation of these types of proposals.
The National Science Foundation has Telephonic Device for the Deaf (TDD) and Federal Information Relay Service (FIRS) capabilities that enable individuals with hearing impairments to communicate with the Foundation about NSF programs, employment or general information. TDD may be accessed at (703) 292-5090 and (800) 281-8749, FIRS at (800) 877-8339.
The National Science Foundation Information Center may be reached at (703) 292-5111.
The National Science Foundation promotes and advances scientific progress in the United States by competitively awarding grants and cooperative agreements for research and education in the sciences, mathematics, and engineering.
To get the latest information about program deadlines, to download copies of NSF publications, and to access abstracts of awards, visit the NSF Website at https://www.nsf.gov
The information requested on proposal forms and project reports is solicited under the authority of the National Science Foundation Act of 1950, as amended. The information on proposal forms will be used in connection with the selection of qualified proposals; and project reports submitted by awardees will be used for program evaluation and reporting within the Executive Branch and to Congress. The information requested may be disclosed to qualified reviewers and staff assistants as part of the proposal review process; to proposer institutions/grantees to provide or obtain data regarding the proposal review process, award decisions, or the administration of awards; to government contractors, experts, volunteers and researchers and educators as necessary to complete assigned work; to other government agencies or other entities needing information regarding applicants or nominees as part of a joint application review process, or in order to coordinate programs or policy; and to another Federal agency, court, or party in a court or Federal administrative proceeding if the government is a party. Information about Principal Investigators may be added to the Reviewer file and used to select potential candidates to serve as peer reviewers or advisory committee members. See Systems of Records, NSF-50, "Principal Investigator/Proposal File and Associated Records," 69 Federal Register 26410 (May 12, 2004), and NSF-51, "Reviewer/Proposal File and Associated Records," 69 Federal Register 26410 (May 12, 2004). Submission of the information is voluntary. Failure to provide full and complete information, however, may reduce the possibility of receiving an award.
An agency may not conduct or sponsor, and a person is not required to respond to, an information collection unless it displays a valid Office of Management and Budget (OMB) control number. The OMB control number for this collection is 3145-0058. Public reporting burden for this collection of information is estimated to average 120 hours per response, including the time for reviewing instructions. Send comments regarding the burden estimate and any other aspect of this collection of information, including suggestions for reducing this burden, to:
Suzanne H. Plimpton
Reports Clearance Officer
Office of the General Counsel
National Science Foundation
Arlington, VA 22230
The National Science Foundation, 4201 Wilson Boulevard, Arlington, Virginia 22230, USA